|
Steel Grits We are authorised distributor of IMI Abrasives Pvt.Ltd for GUJARAT & RAJASTHAN REGION Steel grit is crushed steel shot. They have sharp edges that helps cleaning the surfaces easly. They are used for different aplication (ship building, pipe building, steel construction, granite cutting, tank manufacturing etc.). Our products are very successful in abrasive blasting operations. Because we apply a special heat treatment. After this heat treatment, steel grits have unifom martensitic microstructure.
mainly used in compressed air shot blasting equipment. | IMI GRITS
Denominat | SAE SPECIFICATINS | | SAE
Sizes | SAE Tolerances | Screen
Open mm. | | IG 5,500 | G 200 | All pass through
55% min. between
30% max. pass through | 0,18
0,18-0,075
0,045 | | IG 10 | G 120 | All pass through
60% min. between
30% max. pass through | 0,30
0,30-0,125
0,075 | | IG 20 | G 80 | All pass through
65% min. between
25% max. pass through | 0,425
0,425-0,18
0,125 | | IG 30 | G 50 | All pass through
65% min. between
25% max. pass through | 0,71
0,71-0,30
0,18 | | IG 40 | G 40 | All pass through
70% min. between
20% max. pass through | 1,00
1,00-0,425
0,30 | | IG 60 | G 25 | All pass through
70% min. between
20% max. pass through | 1,18
1,18-0,71
0,425 | | IG 100 | G 18 | All pass through
75% min. between
15% max. pass through | 1,40
1,40-1,00
0,71 | | IG 120 | G 16 | All pass through
75% min. between
15% max. pass through | 1,70
1,70-1,18
1,00 | | IG 150 | G 14 | All pass through
80% min. between
10% max. pass through | 2,00
2,00-1,40
1,18 | | IG 180 | G 12 | All pass through
80% min. between
10% max. pass through | 2,36
2,36-1,70
1,40 |
|
